Product
Overview
Installation Instructions
Download Evaluation Copy
Upgrading Firmware
Contact Us / Provide Feedback
Software version A.01.05 is a revised
version of 802.11g WLAN Signal Studio Software, Option 415, for the E4438C ESG Vector Signal Generator
and is used to simulate a physical layer WLAN transmitter for the IEEE
802.11a/b/g WLAN standards. This
software has been discontinued and can no longer be ordered. The suggested replacement is Signal Studio
for 802.11 WLAN, Option 417, for the E4438C ESG Vector Signal Generator.
·
None
·
Resolved the MAC Header
bit ordering issue. With the previous
version of the software, all bits in each MAC Header field were ordered from
most significant bit (left most digit of the field) to least significant bit
(right most digit of the field).
Version A.01.05 orders the bits in each field as follows:
·
Resolved Scrambling issue. With the previous version of the software,
the 802.11b scrambler was used for the 802.11a and 802.11g OFDM modes. The 802.11a scrambler is now used for the
802.11a and 802.11g OFDM modes.
Back to top of page
Note Supported operating
systems:
Software release A.01.05 of Signal Studio is
compatible with the following hardware and firmware options of the E4438C ESG
Vector Signal Generator:
Signal
Studio Software |
E4438C ESG Vector Signal Generator
Hardware Options |
E4438C ESG Vector Signal Generator
Firmware |
C.02.20
through current |
Works with all hardware options. |
Back to top of page
Software version A.01.02 is the initial
version of Agilent 802.11g WLAN Signal Studio
Software for the E4438C ESG Vector Signal Generator and is used to simulate a
physical layer WLAN transmitter for the IEEE 802.11a/b/g WLAN standards.
The 802.11g WLAN Signal Studio software has
three different modes of operation. Full functionality for all 802.11g modes
requires the installation of the following options on the
ESG:
All three options (415, 410, 405) are
required to be able to download all three types of 802.11g waveforms from the
software into the ESG. If you have previously purchased option 405 and/or 410, the license
key(s) remain valid and you only need to install option 415 to have full
functionality. If you do not want or need full 802.11g
functionality, each mode can be enabled independently with the appropriate
license key.
Back to top
of page
Note Supported operating
systems:
Software release A.01.02 of Signal Studio is
compatible with the following hardware and firmware options of the E4438C ESG
Vector Signal Generator:
Signal
Studio Software |
E4438C ESG Vector Signal Generator
Hardware Options |
E4438C ESG Vector Signal Generator
Firmware |
C.02.20
through current |
Works with all hardware options. |
Back to top
of page